Home > Plastic Film Capacitors > JFLA Dipped Metallized Polypropylene Film Capacitor For Capacitive Divider

JFLA Dipped Metallized Polypropylene Film Capacitor For Capacitive Divider

Suitable for applications in serial with the 100~240Vac mains, as a small power LED driver module, small household electrical appliances control panel (electric kettle, electric cooker, coffee machine, hair straightener etc.), thermostat, replace the transformer. Widely used in LC resonant, high frequency high current situation Following are our Metallized Polypropylene Film Capacitor features, specifications and drawing.

JFLA Dipped Metallized Polypropylene Film Capacitor For Capacitive Divider Features

  • Metallized polypropylene film, non-inductive wound construction
  • Good self-healing properties, withstanding surge voltage stressing.
  • Long stability of capacitance.
  • Good properties in damp environment.
  • Flame resistant epoxy resin powder coating (UL94/V-0).

JFLA Dipped Metallized Polypropylene Film Capacitor For Capacitive Divider Parameters download PDF files

JFLA Dipped Metallized Polypropylene Film Capacitor For Capacitive Divider Specifications

Operating Temperature -40°C~ +85°C JFLA-Dipped-Metallized-Polypropylene-Film-Capacitor-For-Capacitive-Divider
Rated Voltage 400V(230VAC)、630V(275VAC/305VAC/310VAC)
Capacitance Range 0.01 ~ 10.0μF
Capacitance Tolerance ±5%, ±10%, ±20%
Insulation Resistance UR>100V C≤0.33uF IR ≥25000MΩ,C>0.33uF IR ≥7500s
UR<100V C≤0.33uF IR ≥12500MΩ,C>0.33uF IR ≥3750s
Dissipation Factor ≤0.002 (at 1KHz) (typical 0.001 max)

JFLA Dipped Metallized Polypropylene Film Capacitor For Capacitive Divider Drawing

JFLA Dipped Metallized Polypropylene Film Capacitor For Capacitive Divider Drawing

JFLA Dipped Metallized Polypropylene Film Capacitor For Capacitive Divider Typical Circuit

JFL - Metallized Polypropylene Film Capacitor Drawing

JFLA Dipped Metallized Polypropylene Film Capacitor For Capacitive Divider Related Products