SMD E Cap
jb Capacitors manufactures SMD E Cap since 2005, including 2000 hours at 85°C SMD E Cap and 1000 hours at 105°C SMD E Cap. These two series are the most common series among all SMD E Cap. jb Capacitors focuses on production on these two series, and we sell quite competitive prices with good quality. Other series of SMD E Cap is on request if required quantity is good. Please refer to below product list of SMD E Cap. If you would like to check our other aluminum electrolytic capacitors and plastic film capacitors, please go to Products link.
SMD E Cap List
SMD E Cap Pictures
JCS - 2000H at 85°C SMD E Cap Features
- Designed for surface mounting on high density circuit board.
- Tape and reel package is available for automatic insertion.
JCS - 2000H at 85°C SMD E Cap Parameters download PDF files
JCS - 2000H at 85°C SMD E Cap Specifications
| Operating Temperature | -40°C~ +85°C |  |
|---|---|---|
| Voltage Range | 4V ~ 100V.DC | |
| Capacitance Range | 0.1 ~ 470μF | |
| Capacitance Tolerance | ±20% at 120Hz, 20°C | |
| Leakage Current | Leakage current (Φ4~Φ8x6.2) ≤0.01CV or 3μA, whichever is greater. (after 2 minutes application of rated voltage) |
JCS - 2000H at 85°C SMD E Cap Drawing
JCK - 1000H at 105°C SMD E Cap Features
- Chip type, operating with wide temperature range -40~+105°C.
- Designed for surface mounting on high density circuit board.
- Tape and reel package is available for automatic insertion.
JCK - 1000H at 105°C SMD E Cap Parameters download PDF files
JCK - 1000H at 105°C SMD E Cap Specifications
| Operating Temperature | -40°C~ +105°C |  |
|---|---|---|
| Voltage Range | 4V ~ 100V.DC | |
| Capacitance Range | 0.1 ~ 470μF | |
| Capacitance Tolerance | ±20% at 120Hz, 20°C | |
| Leakage Current | Leakage current (Φ4~Φ8x6.2) ≤0.01CV or 3μA, whichever is greater. (after 2 minutes application of rated voltage) |
JCK - 1000H at 105°C SMD E Cap Drawing
About SMD aluminum electrolytic capacitors (SMD E CAP)
An aluminum electrolytic capacitor is a type of capacitor that uses an ionic conducting liquid as one of its plates with a larger capacitance per unit volume than other types. They are valuable in relatively high-current and low-frequency electrical circuits. This is especially the case in power-supply filters, where they store charge needed to moderate output voltage and current fluctuations in rectifier output. They are also widely used as coupling capacitors in circuits where AC should be conducted but DC should not. Electrolytic capacitors can have a very high capacitance, allowing filters made with them to have very low corner frequencies.
jb Capacitors manufactures and markets aluminum electrolytic capacitors since 1982. Aluminum Electrolytic Capacitors from jb Capacitors include SMD aluminum electrolytic capacitors (SMD E CAP) and large can aluminum electrolytic capacitors. Large can aluminum electrolytic capacitors include snap in electrolytic capacitors, screw electrolytic capacitors, and lug type aluminum electrolytic capacitors. Regarding lug type aluminum electrolytic capacitors, we produce standard lug type aluminum electrolytic capacitors, lug type photo flash aluminum electrolytic capacitors and lug type motor starting aluminum electrolytic capacitors, etc.
jb Capacitors is a reliable and stable manufacturer of aluminum electrolytic capacitors. We sell high quality with reasonable prices.
Products
Contact us
Direct line1: (86) 769 8108 2280
Fax: (852) 8169 8283
Skype: jbcapacitors 
MSN: jbcapacitors@hotmail.com
E-mail: info@jbcapacitors.com
jb Capacitor Leaflet (Catalog)
1.Home Page of Leaflet
2.JFA to JFL (Polyester & Polypropylene)
3.JFM to JFT (Film) & JCS JCK SMD E-Cap
4.JNC to JSW (Large Can E-Cap)
jb Capacitors Exhibition Notice
EXPO Electronica 2012
Booth No.: To be advised
Date: 11-13 April ,2012
Address: Crocus Expo , Moscow.
electronicAsia 2012
Booth No.: To be advised
Date: 13-16 October 2012
Address: Hong Kong Convention and Exhibition Centre.